11.2.2.3. Designer

In the Rule Designer, users can define rules that specify the conditions and actions for the dynamic task type.

*For more information on the general features of the Rule Designer, click here.

To define the dynamic task type properties, apply the following steps:

1. In the Conditions section of the window, set up the required conditions for the dynamic task type.

2. In the Actions section of the window, set up the required actions (Call Method and Set Property).

3. Click on the Validate button to assess the validity of the information.
   • If there are any errors, they will appear in the Error tab.
   • If the information is valid, the results will appear in the Output tab.