The Show CAD Point function uses the Flexijet 3D to automatically project a point.

To project a CAD point:

  1. From the Flexijet tab, click on the Show CAD-point icon
    Show CAD-point button
  1. Now, click or tap on the point of your drawing where you would like Flexijet to point. Flexijet will move to project that point.

When the Flexijet laser has reached the point, you will notice that the Command panel in FlexiCAD will also display a distance value, indicating the height difference between the plane and the point currently being projected. For example, a reading of -4.7 indicates a distance of 4.7mm below the plane.
Show CAD-point diagram showing distance

Flexijet will point the point at the height of the plane selected. Depending on variations in the surface, Flexijet may be pointing slightly above or below the actual object.

In order to project a point higher or lower than the plane, follow this link to use the ‘Quick-Aim’ function.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment