| Register Name / Module Address | Assembled Address for PLC | Description |
|---|---|---|
| ConveyMerge Interface 4:0387 |
M: 4:1624 E: O.Data [24] P: Byte 48 (Hi) Byte 49 (Lo) |
|
| Used to dynamically modify a ConveyMerge configuration already established with EasyRoll | ||
| Bitwise Values: | ||
| Bit 15: Set to enable PLC control of ConveyMerge | ||
| Bit 4: Set to disable release from Center line | ||
| Bit 5: Set to disable release from Left line | ||
| Bit 6: Set to disable release from Right line | ||
| Bits 0 thru 3 are interpreted as a numerical value to change the release priority: | ||
| Value: | ||
| 0 = First come, first served release | ||
| 1 = Center Line has priority | ||
| 2 = Left Line has priority | ||
| 3 = Right Line has priority | ||
このトピックへフィードバック