On the new model Kramer tablets, the programmer can configure the tablets directly from their laptop without having to input any information within the tablet itself.


To get the new apk to show the Kramer Control GUI of a Brain, open a Chrome browser and follow the steps below:

  • Enter the below text into your URL making sure to replace brainIP with the IP address of the Brain and tabletIP with the IP address of the KT tablet
    • This will work with both SL and Virtual brains
  • Note: the above will only work if you have a space with a single interface. If you have multiple interfaces you will need to include the interface ID necessary for deep linking.

Other available commands

  • Health
    • https://tabletIP:9804/health/
    • http://tabletIP:9803/health/
  • Remote reboot of tablet
    • https://tabletIP:9804/reboot/
    • http://tabletIP:9803/reboot/
  • Launch URL
    • https://tabletIP:9804/launchurl?
    • http://tabletIP:9803/launchurl?

New Commands available for KT205, KT208, KT2010, KT2015 with firmware version 1.0.92 and newer

  • Tablet Pause Launch URL
    • https://tabletIP:9804/pauseautolaunchurl/
    • http://tabletIP:9803/pauseautolaunchurl/
  • Tablet Resume Launch URL
    • https://tabletIP:9804/resumeautolaunchurl/
    • http://tabletIP:9803/resumeautolaunchurl/
  • Enable Display Control
    • https://tabletIP:9804/displaysettingon/
    • http://tabletIP:9803/displaysettingon/
  • Disable Display Control
    • https://tabletIP:9804/displaysettingoff/
    • http://tabletIP:9803/displaysettingoff/
  • Set Display Off Time
    • https://tabletIP:9804/setdisplayofftimevalue=_value_
    • http://tabletIP:9803/setdisplayofftimevalue=_value_
  • Set Display Brightness
    • https://tabletIP:9804/setdisplaybrightnessvalue=_value_
    • http://tabletIP:9803/setdisplaybrightnessvalue=_value
  • Set Display Dimming Time
    • https://tabletIP:9804/setdisplaydimtime=_value_
    • http://tabletIP:9803/setdisplaydimtime=_value_
Revision: 10
Last modified: 22 March 2024


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment