Each Mix will offer the user the ability to set both the mode of the mix as well as the layer count.
Modes:
XFade: XFade is the mode that allows the full cross-fade on layer engine to be in operation. However as this incurs some amount of overhead it is possible to turn this off also.
Normal: No crossfade engine is running
Special: For non-standard layer based mixes e.g. Notch
Layers:
Between XFade and Normal, the only difference is that Normal mixes also have a 24 layer mode.
For Special Mixes, the Layers selector is the type selector e.g. Notch Mix
Post your comment on this topic.