Nevis+

Hardware

I/O Back Panel

1 x DisplayPort 1.4 ZooKeeper
1 x DisplayPort 1.4 Output
2 x USB2
1 x Stereo Line In
1 x Stereo Line out
2 x Gigabit Ethernet

I/O Front Panel

1 x USB3.1

Physical

Size RU: 1/2U wide, 1U high
Size mm: 220×220×42
Weight: <5kg
Power Input: IEC
Voltage: 100-240V 50/60Hz
Power Consumption: 150W

System Spec

Operating System: Windows 10
CPU: AMD Ryzen
Cores(Threads): 4(8)
Core Speed: 3.6 GHz
RAM: 8GB DDR4 3200MHz
System Drive: 500GB SSD
Media Drive: 500GB SSD
Hardware Warranty: 1 Year

Software

Minimum Software Version

V4+ Systems must run Hippotizer Version 4.5.4 or greater.

Maximum Software Date

V4+ Systems can, subject to Software Assurance, install and run software released until November 1st, 2024.

Drivers

Please refer to release notes for the most up to date drivers and where they can be found.

Outputs

ZooKeeper:

Nevis+ has a single DisplayPort 1.4 ZooKeeper port.
Maximum Resolution: 3840 × 2160 @ 60
Supports Conversion to Analogue (VGA): No
Supports Display Port to DVI adaptor (passive): No
Supports Display Port to DVI adaptor (active): Yes

Output:

Nevis+ has a single DisplayPort 1.4 Output port.
Max Resolution: 3840 × 2160 @ 60Hz
Supports Splitters: Yes
Supports Conversion to Analogue (VGA): No
Supports Display Port to DVI adaptor (passive): No
Supports Display Port to DVI adaptor (active): Yes

A Note about Display Port Adaptors and cables

Compatibility with all Display Port devices can never be guaranteed. Green Hippo has tested many cables, adaptors and displays to determine what works best with Hippotizer systems. The findings show that Active adaptors from Display Port to DVI are the most reliable with those made by Bizlink, Accell or Startech to be of consistent quality. Similarly, Active VisionTek, Startech or Tripplite Display Port to HDMI adaptors have also proven to be among the most reliable. The quality and availability of adaptors varies hugely. Always test a specific adaptor before attempting to use it.

Display Port connections directly from the Hippotizer to a Display Port display or signal handling equipment also relies on a good quality cable. Do not exceed the maximum recommended cable length (normally 6ft or 1.8m) especially when working at UHD or 4K resolutions. Use Vesa certified DisplayPort cables. A full list of which is available on the Vesa website.