Adding and managing Blocks

Notch blocks are stored as files with the extension .dfxdll

Adding Blocks

To add blocks to Hippotizer, save them to the path:

C:\Users\Hippo\Documents\Green Hippo\Notch

Each block name must be preceded with a unique number, followed by an underscore. The number will determine the order blocks are chosen.

For example 01_V4PlusStock.dfxdll will appear first in the list as V4PlusStock

In the image example above, only one of the two hippostockdfx blocks will be visible in Hippo as they have the same index number.

Updating the Block select pin

When blocks are added or removed the Update button must be pressed once on a layer of that system to refresh the block list.

The blocks select pin is also updated on engine restart.