Mode and Layers

Each Mix will offer the user the ability to set both the mode of the mix as well as the layer count.

Modes:

XFade: XFade is the mode that allows the full cross-fade on layer engine to be in operation. However as this incurs some amount of overhead it is possible to turn this off also.

Normal: No crossfade engine is running

Special: For non-standard layer based mixes e.g. Notch

Layers:

Between XFade and Normal, the only difference is that Normal mixes also have a 24 layer mode.

For Special Mixes, the Layers selector is the type selector e.g. Notch Mix

*Even with Normal Mixes, the crossfade pin still exist so DMX will use the same charts and require no reprogramming from this change.