Kramer Control – new tablet setup from tablet

Overview

The Kramer Control setup on the new model, KT-208 & KT-2010, is different from previous versions of Kramer Control. If you intend on setting up the connection between the touch panel and the Brain from the tablet itself, follow the steps below:

Process

Step 1: Launch Chromium

Step 2: Enter IP address of Brain followed by :8000
p(banner tip). If you are using a KC Virtual Brain 1 or 5 the above port will start with 8001

Step 3: Select your Interface

Step 4: Copy the URL

1. Click on the URL bar
   • When you click on the URL, the text will disappear and this is expected
2. Select the icon to copy

Step 5: Open Kramer Agent application

1. You will need to select the home button after copying the URL
2. Click on the Kramer agent application

Step 6: Launch Control Interface

Step 7: Enter IP Address and Interface ID

*Once you click on the Launch Control Interface, your copied URL will auto load into the text box. Just click OK for the interface to be opened in full view

Copyright © 2024 Kramer — Powered by