8.2. Job

• Field
• Event
• Operation
• Operator
• Culture
• Machine
• Guide Type
• Limit Type
• Implement
• Hitch Type
• Implement Sensor
• Implement Distance
• Lateral Displacement
• Overlay
• Distance Antenna – Hitch
• Distance Hitch – Wheel Implement
• Distance Hitch – Barra

*Screen type = Double List

In the settings menu, the Work parameter area is present. In this menu the system settings are made GeoNave concerning the agricultural machine, the operator, which will be the crop, the various parameters of the operation to be carried out, among other relevant work items.
To access the menu, the user must select the Work item and press the confirm button , as shown in the figure below.

You will then be presented with the job settings menu, whose items are represented in the images below.

The work settings menu has some peculiarities, listed below.

• If the Operation is configured as Spraying, the Implement is shown with its value in meters, followed by the value of Number of Nozzles between parenthesis. If the Operation is different from Spraying, the number of nozzles will not be displayed.

• If the parameter Hitch Type is set to Fixed Hitch, the Implement Distance is displayed in the menu.

• If the parameter Hitch Type configured as Traction Bar, 3 other parameters are shown in the menus.
  • Distance Antenna – Hitch
  • Distance Hitch – Wheel Implement
  • Distance Hitch – Barra

The details of each of the items in the work settings menu are performed in the following topics.