10.1. Configure a Machine

To configure the settings of an agricultural machine in the system GeoNave, including tractor and implement, some steps must be followed.

Tractor

Work settings

1. Configure the name of the Machine.
2. Configure the Hitch Type.
   1. For Coupling Type = Fixed Hitch, configure the Implement Distance.
   2. For Coupling Type = Drawbar, to set up:
      1. Distance Antenna – Hitch.
      2. Distance Hitch – Wheel Implement.
      3. Distance Hitch – Barra.

Implement

Work settings

1. Set the width of the Implement.
2. Configure the Implement Sensor.
3. Configure the Overlay.
4. Configure the Lateral Displacement.

Spraying settings

1. For spraying implements, configure:
   1. Number of Nozzles.
   2. Nozzle Spacing.
   3. Number of Sections.
   4. Number of Section Nozzles.