GeoNave 30

6.4.5. Side Buttons

The navigation screen has two side button bars, on the left and right of the map area. Touch-sensitive buttons allow the user to perform a series of actions relevant to agricultural work, access relevant information, configure parameters, among other features.

Side button bar – Left

The left side button bar has the button layout variable according to the Operation selected.

1)Operation = Spraying, Fertilizing, Harvesting, Planting, Others

Item description
Cancel button, to end the current navigation event
Trail button, to enable or disable the application trail
Information button, to change the page of the Information Board
Settings button, to access the menu Settings during Navigation

2)Operation = Irrigation

Configuration Button Occupation
End the current navigation event
Switch to irrigation settings -> Go to configuration
Change the information board page
Access the settings menu while browsing
Activate irrigation -> Go to configuration
End the current navigation event
Switch to irrigation settings -> Go to configuration
Change the information board page
Access the settings menu while browsing
Disable irrigation -> Returns to the configuration
Return from irrigation settings -> Return to configuration
Open the Maximum Irrigation Distance configuration screen
Open the Irrigation Alert configuration screen
Reset the irrigation odometer
Activate irrigation -> Go to configuration
Return from irrigation settings -> Return to configuration
Open the Maximum Irrigation Distance configuration screen
Open the Irrigation Alert configuration screen
Reset the irrigation odometer
Disable irrigation -> Returns to the configuration

Side button bar – Right

To the right of the map area, the arrangement of side buttons on the bar varies according to system settings. The figure below shows an example of the right side button bar.

The buttons on the right sidebar are arranged on three pages. To navigate between pages, the user must press the page switch button .

Page1

The first page of buttons has a variable layout according to the Guide Type that is configured.

1)Guide Type = Straight or Curved

Configuration Button Occupation
Switch to Page2 of buttons on the right sidebar
Mark point A of the guide -> Go to the configuration
Switch to Page2 of buttons on the right sidebar
Mark point B of the guide -> Go to configuration
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Pause tab navigation -> Go to setup
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Resume navigation on the tab -> Returns to the configuration
Bring up the Position Adjustment menu screen

2)Guide Type = Free

Configuration Button Occupation
Switch to Page2 of buttons on the right sidebar
Mark point A of the first line -> Go to the configuration
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Mark point B of the first line -> Go to the configuration
Unmark the first line -> Returns to the configuration
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Mark point A of the current line -> Go to the configuration
Finalize the free guide -> Go to configuration
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Mark point B of the current line -> Returns to the configuration
Unmark the current line -> Returns to the configuration
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Bring up the Map and Current Location screen
Pause tab navigation -> Go to setup
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Bring up the Map and Current Location screen
Resume navigation on the tab -> Returns to the configuration
Bring up the Position Adjustment menu screen

3)Guide Type = Project

Configuration Button Occupation
Switch to Page2 of buttons on the right sidebar
Bring up the Map and Current Location screen
Pause tab navigation -> Go to setup
Bring up the Position Adjustment menu screen
Switch to Page2 of buttons on the right sidebar
Bring up the Map and Current Location screen
Resume navigation on the tab -> Returns to the configuration
Bring up the Position Adjustment menu screen

Page2

Configuration Button Occupation
Switch to Page1 (if demo mode is not activated) or Page3 (if demo mode activated) of buttons on the right sidebar
Start demarcating a new limit -> Go to configuration
Switch the navigation map view to 2D
Switch between zoom levels on the navigation map
Switch to Page1 (if demo mode is not activated) or Page3 (if demo mode activated) of buttons on the right sidebar
Pause the boundary demarcation -> Go to the configuration
End the boundary demarcation -> Go to configuration
Switch the navigation map view to 2D
Switch between zoom levels on the navigation map
Switch to Page1 (if demo mode is not activated) or Page3 (if demo mode activated) of buttons on the right sidebar
Resume the demarcation of the limit -> Returns to the configuration
Switch the navigation map view to 2D
Switch between zoom levels on the navigation map
Switch to Page1 (if demo mode is not activated) or Page3 (if demo mode activated) of buttons on the right sidebar
Switch the navigation map view to 2D -> Go to configuration
Switch between zoom levels on the navigation map
Switch to Page1 (if demo mode is not activated) or Page3 (if demo mode activated) of buttons on the right sidebar
Switch the navigation map view to 3D -> Returns to the configuration
Switch between zoom levels on the navigation map

Page3

Configuration Button Occupation
Switch to Page1 of buttons on the right sidebar
Increase the speed of the demonstration by 0.5 km / h.
Decrease the speed of the demonstration by 0.5 km / h.