The Number of Nozzles for Sections setting establishes how the distribution of the total number of nozzles is carried out between spray sections. The following is the screen for configuring the number of nozzles for the example in the section1.
The total sum of the number of nozzles for each individual section cannot exceed the total number of nozzles, so that the system GeoNave recalculates the number of nozzles for the sections below the one currently being configured, according to the last changed value.
For example, a configuration with a total number of 10 nozzles and a number of sections equal to 3 will be used. When configuring the first section with 4 nozzles, sections 2 and 3 will automatically be filled with 3 nozzles each, dividing the rest of the 6 nozzles equally between them.
In the same example, if in the sequence the user tries to configure the second section with 6 nozzles, the system will alert you that the number of nozzles is invalid, as there will be no remaining nozzles for the third section.
On the other hand, if the configuration of the second section is carried out with 5 nozzles, the third section will automatically assume the value of 1 nozzle, thus completing the total sum of the 10 nozzles of the implement.
