Within the settings menu is the area for configuring the parameters of the Spray implement. To access the menu, the user must select the item Spraying and press the confirm button 
, as shown in the figure below.
If the Operation is set to a value other than Spray, the alert type Information asking the user to change the parameter value, as shown in the following image.
If the value of the Operation is correct as Spray, the spray implement settings menu, also called The number of menu lines identified with the text “Nozzles Section N”, where N is the section number, is variable according to the number of sections configured, and in each line the width of the implement is shown in parentheses than the number corresponding nozzles will cover in the application.
The following figures show the example of the spray settings menu for 9 sections.
In the next topics, each item of the spray settings menu will be detailed.
