In the settings of the terrain compensator there is the parameter of the Position of the Arrows. The compensator cabinet has the design of two arrows, identified with the numbers 1 and 2, arranged perpendicularly between them. The installation of the terrain compensator must be carried out in such a way that the arrows are either perpendicular or parallel to the longitudinal axis of the tractor. If the arrows are out of alignment with the axis, terrain compensation will be seriously compromised.
The figures below show examples of installing the terrain compensator according to the position of the arrows.
The Arrows Position parameter screen has 24 configurations available, in which the position of arrows 1 and 2 is always shown in relation to the tractor’s longitudinal axis in the forward direction. The following images show all the options on the screen.
