6.4.4. Information Board

Near the bottom of the navigation screen is the information board. Through the table it is possible to view several important information during navigation operation, without the need to return to the system configuration menus GeoNave.

In the composition of the navigation screen, the information board is shown as shown in the following image. When pressing the information button , the information page shown in the table is changed.

The following are images of the sequence of pages in the system information board ISO 30, including the description of each item that comprises them.

Note: The page is presented only for the Irrigation operation.

Page	Item	description
		Icon Signal Quality of satellites
		Corrections quality icon RTK
		Paid sign corrections quality icon
	Differential Age	Time in seconds since the last signal correction message (when configured)
	Base Distance	Distance to antenna GNSS from the base RTK (when configured)
	Dist. Travel	Distance traveled so far at work
	Total area	Total boundary area
	Applied Area	Total applied area
	Remaining Area	Difference between the total area of ​​the boundary and the total area applied
	Field	Field file name used
	Event	Name of the event file used
	Operation	Operation being applied
	Culture	Name of the configured culture
	Machine	Configured machine name
	Implement	Value the parameter of the configured implement width (for spraying, includes the number of nozzles)
	Overlay	Overlap parameter value configured
	Dist. Implement	Value of the antenna distance parameter to the configured implement
	Maximum Distance	Maximum Distance parameter value, configured in
	Dist. until the alert	Distance from the start of the irrigation application to the distance from the alert, set in
	Limit	Remaining distance to reach Maximum Distance (hose length)
	Odometer	Value of the distance traveled since pressing the odometer reset button
	Operator	Operator name configured
	DD / MM / YYYY – HH: MM	Current date and time
	Working time	Total work time since the event opened
	Effective Time	Effective working time, in which there was application
	A-Lon	Longitude in degrees of point A of the straight guide
	A-Lat	Latitude in degrees of point A of the straight guide
	B-Lon	Length in degrees of point B of the straight guide
	B-Lat	Latitude in degrees of point B of the straight guide
	Course	Straight guide bearing angle
	Distance A-B	Distance between points A and B of the straight guide
	Lon	Longitude in degrees from the current point of GNSS
	Lat	Latitude in degrees from the current point of GNSS
	Altitude	Altitude in meters from the current GNSS
	HDOP	Dilution value of the horizontal precision of GNSS
	Sat. Visible	Number of satellites GNSS visible
	Sat. Used	Number of satellites GNSS used in the solution