8.2.16. Distance Hitch – Wheel Implement

*Screen type = Value Edit with Picture

*Decimal places =2
Minimum value = 0.30 m
Maximum value = 20.00 m

The Hitch Distance – Implement Wheel parameter defines the distance in meters, measured on the tractor’s longitudinal axis, between the tractor hitch point for dragging implements and the center of the implement wheel. In conjunction with the other two parameters – Distance Antenna – Hitch and Distance Hitch – Barra, the system GeoNave builds the drawbar implement geometry shown graphically on the navigation screen.

The presence of the Engage Distance – Implement Wheel parameter in the Work menu is dependent on the parameter setting Hitch Type like Drawbar.

The image below shows the screen for setting the parameter Distance Hitch – Wheel Implement, containing the self-explanatory figure of its meaning.