6.2. Touch Sensitive Buttons

The system screens GeoNave they have several types of touch sensitive buttons, each with specific functions on each type of screen. The following shows the possible states that a button can assume on the screen, as well as the description of each type of existing button.

Button states

The buttons can have 4 states, described in the table below with the example of the button marking point A of the guide.

state	Image	description
Normal		Normal button state, without pressing the user. It also indicates that the function activated by the button is inactive.
Held down		Button state during user touch screen.
Active		Indicates that the function activated by the button is active.
Intermittent		Indicates the next action the user must take by pressing the flashing button.

Button Types

The following describes the types of buttons that make up the system screens GeoNave.

Configuration Screen Buttons

Button	description
	Menu Contact Information
	Menu Information> Satellites
	Menu Information> Equipment
	Navigation Menu
	Navigation Menu> Create Field
	Navigation Menu> Open Event
	Settings menu
	Settings menu> Spraying
	Settings menu> Work
	Settings Menu> Pilot
	Settings menu> Fertilization
	Settings menu> Memory
	Settings menu> RTK
	Settings menu> Advanced
	Return a screen
	Advance a screen
	Confirm a selection or setting
	Cancel a selection or setting
	Select the option above
	Select the option below
	Select the option on the left
	Select the right option
	Edit the value of a parameter
	Increment the value of a parameter
	Decrement the value of a parameter
	View item information
	View item information
	Load a file from portable memory to internal memory
	Deleting a file from internal memory
	Download a file from internal memory to portable memory

Navigation Screen Buttons

Button	description
	Exit navigation
	Trigger the trail
	Switch between information bar data
	Access the settings menu
	Change the button page
	Marks point A, or start point, of a guide
	Marks point B, or end point, of a guide
	Pause guidance by the guide
	Resume guidance through the guide
	Access the position adjustment menu
	Start limit
	Pause threshold marking
	Resume limit marking
	End limit
	Change the view to 2D
	Change the view to 3D
	Change the zoom level
	Increase the speed of the demo
	Decrease the speed of the demo