8.2.9. Implement

*Screen type = Value Edit with Picture

*Decimal places =3
Minimum value = 1,000 m
Maximum value = 50,000 m

The Implement parameter sets the width of the agricultural implement used in the operation of the system GeoNave. Allied with the parameter of Overlay, the implement width defines the distance between the parallel navigation guides that the machine must travel to fill the entire area of ​​the field with the agricultural input being applied.

The following are some considerations about the implement parameter.

• If the Operation is configured as Spraying, the Implement parameter is shown with its value in meters, followed by the value of Number of Nozzles between parenthesis. If the Operation is different from Spraying, the number of nozzles will not be displayed.

• If the Operation is set to Spray, the value of the Implement parameter cannot be edited in the Work menu. Its value will be the result of the multiplication between the values ​​of the parameters of Number of Nozzles and Nozzle Spacing. By clicking the edit button , the alert screen shown below will be displayed.

• If the Operation is different from Spraying, the screen for editing the implement width value will be displayed, as shown in the following image. The screen contains the self-explanatory figure of the meaning of the implement width parameter.