6.4.2.3. Guides

The guides are the virtual lines that represent the path where the machine must go, in order to carry out the agricultural application work in parallel lines. The system GeoNave displays three lines of guides on the navigation screen. The center line, marked in red, is the target guide and closest to the machine at the moment. The other two lines marked in blue represent the parallel guides, to the right and to the left of the target guide, which are naturally the next guides to be followed after the maneuver at the end of the field.

The following is an image showing the details of the tabs in the map area of ​​the navigation screen.

Item	description
	Target guide, drawn as a solid red line, representing the closest guide to the machine.
	Next parallel guide to the right of the target guide, drawn as a solid blue line.
	Next parallel guide to the left of the target guide, drawn as a solid blue line.
	Number that identifies the parallel guides, in relation to the initial guide A-B, or zero guide. Positive numbers represent guides to the right of direction A -> B. Negative numbers represent guides to the left of direction A -> B.
	Graphical representation of the deviation from the target guide shown in the navigation screen header.