On the navigation screen, the Trail corresponds to the area in which the agricultural application actually took place, being filled in the screen in green according to the width of the Implement currently configured.
To turn the track fill function on or off, in the system GeoNave Excuse ISO 30 there are two options.
Application Button
THE Application Button is used to update the trail status on the navigation screen. Each press of it causes the state to alternate between enabled and disabled.
Trail button
On the Side Buttons – Left the touch-sensitive button is present. In the same way as the application button, each time the button is pressed, the trail status is alternated between enabled and disabled.
If the trail is enabled, the button will be in its active state 
. Otherwise, in the idle state 
.
