Just below the information board is the footer of the navigation screen. Its area is used mainly to present the state of the application, spraying or fertilizing sections, for licenses ISO 31, ISO 32, ISO 34and ISO 35.
On license ISO 30, only the spraying operation has the status of the sections shown, but with no function for the touch sensitive buttons. For the other operations, the name of the operation is shown, as shown in the example below for harvesting.
In the spraying operation, the states of the sections are presented according to the configured number. The following image illustrates an example of the state of the spray sections. If a section can be opened at the moment (not in overlapping area, or within the boundary area), the section figure appears with a green background 
. If the section must be closed (it is in an overlapping area, or outside the limit) the section figure is shown with a red background 
.
The baseboard also takes on a different configuration during application in the irrigation operation. While the procedure of stretching the hose in the field is carried out, the hose length-limiting ruler is presented including visual alerts, as shown in the figure below.
