8.7.1. Brightness

*Screen type = Choose Vertical

*Minimum value =1
Maximum value =5

The Brightness parameter is found in the Advanced Settings menu, which is used to configure the luminous intensity of the screen’s background. LCD of the monitor GeoNave, and also of LEDs da Light Bar. Brightness should be adjusted according to the level of visual comfort that the user wants.

The figure below shows the Brightness configuration screen.

While the Brightness value on the Choose Vertical is changed, the luminous intensity of the background of the LCD is changed to user perception. If the cancel button is pressed, the previous value is resumed and the change is undone. If the confirm button is pressed , the new Brightness value is saved in the system.