| Register Name / Module Address | Assembled Address for PLC | Description |
|---|---|---|
| Release and Accumulate on Next Arrival for Local Upstream Zone 4:0105 |
M: 4:1608 E: O.Data [8] P: Byte 16 (Hi) Byte 17 (Lo) |
When bit 0 of Accumulation Control for Local Upstream Zone is set: |
| Changing the value in this register will cause the Carton accumulated in this zone to release and the zone will be armed to automatically accumulate the next Carton that arrives | ||
| Release and Accumulate on Next Arrival for Local Downstream Zone 4:0185 |
M: 4:1609 E: O.Data [9] P: Byte 18 (Hi) Byte 19 (Lo) |
When bit 0 of Accumulation Control for Local Downstream Zone is set: |
| Changing the value in this register will cause the Carton accumulated in this zone to release and the zone will be armed to automatically accumulate the next Carton that arrives | ||
| Set Status for Upstream Induct 4:0134 |
M: 4:1610 E: O.Data [10] P: Byte 20 (Hi) Byte 21 (Lo) |
Only used when local module is accepting loads from Non-ConveyLinx controlled conveyor: |
| Set value to 4 to cause the local upstream zone to run to accept the Carton being delivered by the non-ConveyLinx controlled conveyor. Set value to 1 to cause the local upstream zone to accept the tracking data written in Set Induct Tracking Word 1 / Word 2 | ||
| Set Status for Downstream Discharge 4:0232 |
M: 4:1611 E: O.Data [11] P: Byte 22 (Hi) Byte 23 (Lo) |
Only used when local module is discharging loads to Non-ConveyLinx controlled conveyor: |
| • Set value to 5 to cause the local downstream zone to accumulate and hold any Carton that arrives | ||
| • Set value to 1 to allow the local downstream zone to release the Carton |