The current loading on the power supply for a group of ConveyLinx Modules depends upon the Motor Type selected. Each of the motor types available has an associated rated current that the motor will draw at rated torque and maximum speed. Each motor type also has an associated allowed current draw that is available for a period of time upon the initial starting of the motor. Theses current values and starting times are shown in the following chart:

Power supply load per Motor Port at rated torque at maximum speed 2.5 A 3.5 A 3.5 A
Power supply load per Motor Port during motor starting period 3.0 A 5.0 A 8.0 A
Duration of motor starting period 5.0 sec 1.5 sec 3.0 sec