STEP 1: Add the Module to the PLC Network
|From the Catalog window, drag and drop the ConveyLinx-Ai in reduced ZPA mode DAP into the Network View window|
|To attach the module to the PLC, click on the Not Assigned link and select the desired Profinet Interface of the PLC|
|When attached, you will see the green graphic linking the PLC and the module together|
STEP 2: Assign the EXACT Profinet Name to the Module
STEP 3: Enter the I.P. Address
STEP 4: Select Update Time Interval
Follow the same STEP 4 as in Full ZPA Example. Because this module is in ZPA mode, the recommended Update time to be between 32ms and 512ms.