English
- Japanese

ConveyLinx-Ai Family Complete Guide

3.0
2.1
2.0
1.7

Table of Contents

ConveyLinx-Ai Family Complete Guide

2.1

1. About This Manual
2. Glossary of Terms
3. Getting Started
4. Module Hardware
- 4.1. Module Hardware Revisions
- 4.2. Identifying Module Components
- 4.3. Mounting Dimensions
- 4.4. Module Power Connections
- 4.5. Motor and Logic Power
- 4.6. Proper Motor Grounding Practice
- 4.7. Power Supply Sizing
- 4.8. Motor Ports
- 4.9. Sensor Ports
  - 4.9.1. Electrical Connections for Sensor Port Aux I/O
- 4.10. Ethernet Ports
- 4.11. LED Status Indicators
- 4.12. Technical Specifications
5. Auto-Configuration
- 5.1. Device Connections to Modules
  - 5.1.1. Examples that will generate errors
- 5.2. Motor Rotation Definition
- 5.3. Node Connections for a Subnet
- 5.4. Installing EasyRoll
- 5.5. ConveyLinx Ethernet Definition
- 5.6. Connecting Your PC to the Network
- 5.7. Auto-Configuration Procedure
- 5.8. Expected Results
- 5.9. What to do if things go wrong
6. Default Settings and Operation
- 6.1. Singulation Release Mode
- 6.2. Flex Zone Recognition
- 6.3. Jam Conditions
  - 6.3.1. Arrival Jam
  - 6.3.2. Sensor Jam
- 6.4. Automatic Module Replacement
- 6.5. Reset to Factory Default Settings
7. EasyRoll Software
- 7.1. Main Screen
- 7.2. Advanced Dialog
8. ConveyMerge
- 8.1. ConveyMerge Prerequisites and Requirements
- 8.2. Network Architecture
- 8.3. Sensor Placement
- 8.4. Merge Zone Module
- 8.5. Merging Lines
- 8.6. Merge Configurations
- 8.7. Merge Priority
- 8.8. T-Merge Settings
- 8.9. Configuring Dynamic Priority Release
- 8.10. Enabling ConveyMerge from EasyRoll
- 8.11. Conventional Spur Merge Example
- 8.12. T-Merge Example
- 8.13. Merge Line Full Example
9. IOX Interface Module
- 9.1. Wake up and/or Lane Full Interface
- 9.2. Wake up/Lane Full with Wired Terminals
- 9.3. Wake up/Lane Full with Discrete Signals
- 9.4. Wake up/Product on Zone Handshake Interlock
- 9.5. Downstream/Product on Zone Handshake Interlock
- 9.6. Pin 2 Output on Aux I/O M8
- 9.7. Pin 2 Output on Wired Terminals
10. PLC Developers Guide
- 10.1. Network Architecture
- 10.2. Understanding Assemblies
- 10.3. ZPA Mode Control
- 10.4. PLC I/O Mode Control
- 10.5. ConveyLogix Interface
  - 10.5.1. ConveyLogix Assembly Inputs to PLC
  - 10.5.2. ConveyLogix Assembly Outputs from PLC
- 10.6. Assemblies with Reset Protection
- 10.7. Motor Port as Digital I/O
11. Setting Up Dual Motor Zones
- 11.1. Two Ai MDRs Mechanically Coupled
- 11.2. Two Ai Motors in One Roller Tube (Dual Drive)
- 11.3. Two Motor Rollers in One Logical Zone Not Coupled
12. Connecting to Rockwell PLCs with Ethernet I/P
- 12.1. Selecting Your Connection Method based upon Assembly
- 12.2. Using Generic Ethernet Module Method
- 12.3. Procedure for Connecting using Generic Ethernet Module
  - 12.3.1. Parameters for Each Assembly
- 12.4. Procedure for using EDS Method
- 12.5. Using Add On Instructions (AOI) with RSLogix 5000
  - 12.5.1. AOI Tag Descriptions
- 12.6. Using Logix 5000 MSG Instruction
- 12.7. EDS Module Data Type Cross Reference
13. Connecting to Siemens PLC with Profinet IO
- 13.1. Preparing Your Programming Environment
- 13.2. Modes of Operation
- 13.3. Understanding the Two Configuration Methods
- 13.4. Separate ConveyLinx Auto-Configuration
  - 13.4.1. Profinet Name
  - 13.4.2. Examples of Adding Modules
- 13.5. Integrated PLC Topology Configuration
- 13.6. Accessing Data from ConveyLinx Modules
- 13.7. User Data Types (UDTs)
  - 13.7.1. UDTs for Ai2 Family
- 13.8. Troubleshooting

Download as PDF

7.1.3.1.1. Singulation Release

7.1.3.1. Release Mode

7.1.3.1.2. Train Release

*Singulation Mode is the default setting and it is described in the Default Settings and Operation section

7.1.3.1. Release Mode

7.1.3.1.2. Train Release

Copyright © 2024 PULSEROLLER