| Register Name / Module Address | Assembled Address for PLC | Description |
|---|---|---|
| Local Status Upstream Zone Forward Direction 4:0116 |
M: 4:1500 (Lo Byte) E: I.Data [0] (Lo Byte) P: Byte 1 |
Unsigned Value of Byte: 0×01 = Zone sensor clear and motor stopped 0×02 = Zone sensor clear, motor running, accepting from upstream zone 0×04 = Zone sensor blocked, motor running, discharging to downstream zone 0×05 = Zone sensor blocked and motor stopped 0×06 = Busy (state during ConveyStop active mode) |
| Local Status Upstream Zone Reverse Direction 4:0116 |
M: 4:1500 (Hi Byte) E: I.Data [0] (Hi Byte) P: Byte 0 |
|
| Local Status Downstream Zone Forward Direction 4:0196 |
M: 4:1501 (Lo Byte) E: I.Data [1] (Lo Byte) P: Byte 3 |
|
| Local Status Downstream Zone Reverse Direction 4:0196 |
M: 4:1501 (Hi Byte) E: I.Data [1] (Hi Byte) P: Byte 2 |
The values 0xXX01 thru 0xXX06 are shown because these are the possible logical values used for inter-module communication. External networked devices (PLC or PC) monitoring these registers may; depending on their scan rate, not actually see each of these values change in sequence as a Carton is conveyed from zone to zone, even though the inter-module communications and ZPA is functioning normally.