When changing the mode of a given ConveyLinx-Ai Family Modules to PLC I/O mode in EasyRoll, you are given the option to select the behavior of the ConveyLinx-Ai Family Modules’s outputs upon loss of communications with the PLC.
Select “Don’t Change” if you want module’s logical outputs and MDR’s to remain in the state they were in at the time of the communication loss Select “All OFF” to instruct the ConveyLinx-Ai Family Modules to turn off all logical outputs and stop all MDR’s at the time of communication loss. Upon re-establishing communications with the PLC, the ConveyLinx-Ai Family Modules will automatically resume having its outputs and MDR’s controlled by PLC command |