Arcs

Arc of 3 points.

To draw an arc over 3 points:

• Click or tap the icon. Then, define the first, second, and third points.
• The command line will now prompt you for an additional second point. This allows the user to draw additional arc segments, using the 3rd point as a new 1st point.
• Alternatively, click ‘Confirm’, ‘Cancel’, or ‘ESC’ to end.

Start, end, radios, and bend direction arc.

• Click or tap the button under the drop-down menu from ‘Arc”.
  
• Select the start point of the arc and then the arc’s endpoint (second point).
  
• Input the desired radius. The tool will calculate the minimum radius that can be used.
  
• Now click on the direction of your arc, and the arc will be displayed with the specific radius you selected.