Online System

Online System	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ✅	ConveyLinx-Ai 48V ✅

	ConveyLinx-ECO ✅	ZPA Mode ✅	PLC I/O Mode ✅

The top level of the Online System presents the below screen. From here you may interact with many aspects of the Online System.

Item	Function	Description
	Online System	Click to open the Online System screen Tree expands to show all Online System options Right clicking allows you to Discover Modules on the network without navigating to the Import Backup button
	Discover Modules	Discover modules from the network, presents you a list of all found modules Allows you to find and interact with specific modules in your system
	Show Nodes from:	Click “All Adapters” drop down to select between the Adapter Ethernet 6 and the Adapter Wifi Click on “All Subnets” to specify a particular subnet on your network
	Topology & AutoConfig	Click this to open a topology view of all modules on the network AutoConfig results in all modules having been configured to the same Subnet and Subnet Mask
	Commission From Project	Configured settings can be transferred from an offline project onto an online project by using the “Commission from Project” feature Make setting up a system easy by creating an offline version of it in your office, then using it to configure the online application in the field
	ConveyStop	Click to configure the group of modules for ConveyStop Make sure to have a new project saved as you are beginning to use EasyRoll+ for your ConveyStop needs
	Scope Function	Allows you to trouble shoot particular instances of your process by graphing data either in Real Time or by Traces Graph multiple data points, choose the parameters within which you gather the data, and then save the produced files to review or compare later
	Settings of the selected node	Shows existing configuration for the selected module Allows you to Set new settings, Backup the configured module settings, Restore previous settings, Restore the module by its IP address, and to upgrade the firmware of the selected node