Module Configuration Screen Tabs / Zones / Additional Settings /

Disable Reset Delays	ConveyLinx ERSC ✅	ConveyLinx-Ai 24V ✅	ConveyLinx-Ai 48V ✅
	ConveyLinx-ECO ✅	ZPA Mode ✅	PLC I/O Mode ❌

Any individual zone or group of zones can be configured to ignore the Auto Clear Time delay for either or both the Arrival Jam and Sensor Jam.

Clicking either or both check-boxes will cause the zone’s logic to ignore the Auto Clear Time delay for the particular jam condition

! Selecting either of these options will not eliminate the detection of the particular jam condition; it simply eliminates the default Auto Clear Time delay the logic utilizes before automatically clearing the condition.