Connecting Your PC to the Network |
ConveyLinx ERSC ✅ |
ConveyLinx-Ai 24V ✅ |
ConveyLinx-Ai 48V ✅ |
![]() |
![]() |
![]() |
| ConveyLinx-ECO ✅ |
ZPA Mode ✅ |
PLC I/O Mode ✅ |
![]() |
![]() |
![]() |
You can connect your PC to a ConveyLinx network with a standard RJ-45 Ethernet cable at either end of the string of modules.
*Image depicts ConveyLinx-Ai2 modules. Concept applies to all ConveyLinx module types.
!It is highly recommended to connect the PC directly to the ConveyLinx network. Avoid trying to connect via Ethernet switches or wireless router/switches. If a wireless switch is not setup properly then the Discover Feature will not work. Also ensure that network firewall is turned off for proper discovery
Post your comment on this topic.