Module Configuration Tabs / Sensors / ConveyLinx-ECO Family /
Inverting the Pin 2 Signal |
ConveyLinx ERSC ❌ | ConveyLinx-Ai 24V ❌ | ConveyLinx-Ai 48V ❌ |
 |
 |
 |
|
| ConveyLinx-ECO ✅ | ZPA Mode ✅ | PLC I/O Mode ❌ | |
 |
 |
 |
| On this dialog, you can also invert the meaning of the electrical signal by checking the Invert box for either or both Pins. In this example, because we have the Invert box checked for both Pin signals, their respective functions will be activated when their signal is electrically OFF. With the Invert box checked, when the zone is clear, the electrical signal will be ON |
 |
Post your comment on this topic.