8.1.3.5. Regulating Valve Time

*Screen type = Value editing

*If the GeoNave system license does not have Flow Control functionality – licenses ISO 31FS and ISO 31VS -, or if the parameter Regulation Valve is configured as Not available, the Regulation Valve Time parameter will not be present in the valve settings menu.

*Decimal places =1
Minimum value = 0.5 s
Maximum value = 60.0 s

Regulation Valve Time parameter is used to define total opening and closing time of spraying implement regulation valve, according to nominal value of used valve model. The GeoNave system uses this value to optimize the performed regulation valve control to maintain the target rate.

The following image shows Time Regulation Valve parameter setting screen.