8.2.9. Implement

*Screen type = Value editing with image

*Decimal places =3
Minimum value = 1,000 m
Maximum value = 50,000 m

Implement parameter sets the width of the agricultural implement used in the GeoNave system operation. Together with the Overlap parameter, the implement width defines the distance between the parallel navigation guides that the machine must travel to fill the entire field area with the agricultural operation being performed.

The following are some considerations about the implement parameter.

• If Operation parameter is configured as Spraying, the Implement parameter is shown with its value in meters, followed by the Number of Nozzles value between parenthesis. If Operation parameter is not configured as Spraying, the number of nozzles will not be displayed.

• If Operation parameter is configured as Spraying, the Implement parameter value cannot be edited in the Work menu. Its value will be the result of the multiplication between the values ​​of Number of Nozzles and Nozzle Spacing parameters. When touching the edit button , the alert screen shown below will be displayed.

• If Operation parameter is not configured as Spraying, the screen for editing implement width value will be displayed as shown in the following image. The screen contains the self-explanatory image of its meaning.