8.1. Spraying

*Screen type = Vertical menu

• Works
• Boom
• Valves
• Sensors
• Tank
• Diagnosis
• Advanced Settings

*The menu in its complete spraying configuration is shown only if spraying license is available – ISO 31, ISO 32, ISO 35, ISO 37. For other licenses, the menu will be presented in a simplified form, containing only Boom settings area.

Within the settings menu, this is the area for parameters configuration, performing diagnostics and calibrations related to the Sprayer implement. To access the menu, the user must select Spraying and press the confirm button , as shown in the image below.

If Operation is set to a value other than Spraying, Information alert will appear asking to change the parameter value, as shown in the following image.

If Operation value is Spraying, Vertical Menu Spray Configuration screen will appear, as shown in the following images.

In the next topics, each areas that composes the Spraying settings menu will be detailed.