Just below the information board is the navigation screen footer. This area is mainly used to present spraying or fertilizing application sections state, for licenses ISO 31, ISO 32, ISO 34 and ISO 35.
In licenses ISO 31, only spraying operation has section status shown. For other operations, the operation name is shown, as in the example below for harvesting operation.
In spraying operation, the states of the configured sections are shown. The following image illustrates an example of spraying sections state. If a section can be opened at the moment (not in overlapping area, or within boundary area), the section image appears with a green background 
. If the section must be closed (it is in an overlapping area, or outside boundary area) the section image is shown with a red background 
.
The button width varies according to the configured sections number (1 to 9), and can assume the following states.
| state | Description |
|---|---|
 |
Section without overlap, switch on, applying |
 |
Section without overlap, switch on, not applying |
 |
Section without overlap, switch off |
 |
Overlapping section, switch on, applying |
 |
Overlapping section, switch on, not applying |
 |
Overlapping section, switch off |
The footer also takes on a different configuration during irrigation operation. While the hose laying down procedure is carried out in the field, the hose length-limiting ruler is presented including visual alerts, as shown in the image below.
