In the Add Language area of the language management menu, the user can add a new language in one of the two configurable positions of the GeoNave system.
In the menu Languages - Manage, select the Add Language option and press the confirm button 
. If a flash drive is not connected, or if the I18N.LNG file is not available in the root folder of the flash drive, an Information screen will be displayed, as shown in the following image.
If the flash drive is correctly connected to the USB interface and the I18N.LNG file is loaded in the root folder of the flash drive, the system checks whether any of the two configurable language positions are available. If both positions are occupied, the following message is displayed.
If any of the positions is available, a Simple List screen is displayed, according to the image below, containing the names of configurable languages (written in the corresponding language) of the I18N.LNG file. Fixed languages - Portuguese, English, Spanish – are not listed.
Selecting a language and pressing the confirm button again , the language will be installed on the GeoNave system. Then an Information screen with the message of successful installation will be displayed, as shown in the image below.
If the selected language is already installed on the GeoNave display, an Information screen will be displayed, as shown in the following image.
To check and select the newly installed language, the user must access the Language parameter on the advanced settings screen.
