*If the Flowmeter parameter is configured with value 0 (flowmeter disabled), the Fill Tank item will not be displayed in the Settings during navigation menu.
To fill the sprayer tank level, according to the Tank Capacity informed value, the user must select the item Fill Tank in the Settings during navigation menu, accessible on the navigation screen via the settings button ![]()
, and press the confirm button ![]()
.
*To complete the tank filling process, the machine must be stopped, and with the main sprayer switch off.
*The GeoNave system does not have an analog tank level sensor, so the calculation is based on the initial level informed by the user when completing or changing the tank level, decreasing the amount of sprayer fluid that passed through the flowmeter. To obtain a calculation as accurate as possible, it is important to correctly perform the Flowmeter Calibration.
, and press the confirm button 
.