The Number of Section Nozzles setting establishes how the distribution of the total number of nozzles is carried out between spraying sections. The following is an example of the number of nozzles configuration screen for section 1.
The total sum of the number of nozzles of each individual section cannot exceed the total nozzles number, the GeoNave system recalculates the number of nozzles for the sections below the one currently being configured, according to last changed value.
For example, considering a configuration with a total number of 10 nozzles and a number of sections equal to 3. When configuring the first section with 4 nozzles, sections 2 and 3 will automatically be filled with 3 nozzles each, dividing the remaining 6 nozzles equally between them.
In the same example, if afterwards the user tries to configure the second section with 6 nozzles, the system will alert that nozzles number is invalid, as there will be no remaining nozzles for third section.
On the other hand if the configuration of the second section is carried out with 5 nozzles, third section will automatically assume the value of 1 nozzle, thus completing total sum of 10 nozzles of the implement.
