The Value editing with image screen template is used to modify a numerical parameter value also presenting an image of what the parameter physically represents on the machine. The template consist of numeric keypad, graphics items, touch sensitive buttons, title, entered value viewing area and an image that physically represents the parameter.
The image below represents an example of a Value editing with image screen, to change the Implement Width parameter numerical value.
| Item | Description |
|---|---|
 |
Value editing screen title bar, containing the name of the numeric parameter being edited. |
 |
Touch sensitive button to return to previous screen. |
 |
Numeric keypad for entering the value. Contains decimal point key, positive or negative sign key and thousands key. |
 |
Backspace key to erase the last digit. |
 |
Clear key to delete the entire entered value. |
 |
Image that physically represents the machine parameter. |
 |
Entered value viewing area. |
 |
Confirm button to save the parameter new numerical value. |
After confirmation 
, the Saving Parameter screen will be displayed. In this screen, parameter new numerical value will be saved in the GeoNave system. After that, the next screen that will be displayed is the value editing source screen.
The minimum and maximum possible values varies according to parameter being edited. The following Information screen will be displayed if the user enters a value outside the valid range, informing the correct values that the parameter can assume.
| Item | Description |
|---|---|
| |
Screen title bar, containing the text “Value Not Allowed”. |
| |
Parameter minimum possible value. |
| |
Parameter maximum possible value. |
| |
Confirm button to accept information. |
