Scan Using Indexes Above (Twain Scanner)

*Scan Using Indexes Above (Twain Scanner) is used for Twain Scanning WITHOUT the RVI PC Viewer. Twain Scanning WITHOUT the RVI PC Viewer requires RVICommunications.exe. Refer to Setup RVI Communications Server for further instructions.

1. Type the desired index values into the index search window. (You MUST supply at least one index.)
   

2. Select the button.

3. Select the button.

4. Choose Scan Using Indexes Above (Twain Scanner).

The twain interface (specific to the make/model of the scanner) will pop up.
If the twain interface does not automatically pop up, verify the twain device is specified in the RVI Communications Server setup.

Once the scan option is selected from the twain interface, the image will be displayed inside the One Look browser interface.

5. Select Accept to save the scan or Cancel to reject the scan.
   

!If you receive the following error, the Twain setup is not being recognized.

The error is due to one or more of the following:
• Twain Driver is not installed
• RVI Communication Server is not installed/running in the System Tray on the pc.
• A Twain Device is not specified in the RVI Communication Server.

Copyright 1992, 1999, Real Vision Software, Inc. (RVI), Alexandria, Louisiana. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means without the express written consent of RVI Software, P.O. Box 12958, Alexandria, LA 71315-2958. However, copies of the One Look Manual can be reproduced, in whole or part, for use with the Real Vision Imaging System by Real Vision Software Licensee’s, for use with the imaging system.