Print To RVI

!One Look requires the RVI PC Viewer for print to rvi.
The RVI PC Viewer must be Connected: IBM DATA QUEUES .
The One Look browser must be Host-Socket Connected .
Refer to Setup/Maintain IBMi Host Socket under How To Instructions section for details on workstation configuration when using Host Socket.

1. Open the RVI PC viewer (RVI.EXE) and One Look browser.

2. Open the file you want to print to RVI.

3. Select File/Print.

4. Select Send To RVI PC Imaging.

*If Send To RVI PC Imaging is not listed as a printer, install the printer driver included in the RVI PC Viewer installation or by going to the Support Downloads.

Based on the configuration, the user may get a RVI Index Values pop up allowing them to index the document at print time.

The RVI Index Values pop up is controlled by the RVI PC Viewer check box found under Image/Preferences/Index Options/Index Print to RVI documents at time of print

5. Verify the button in the bottom left hand corner of the RVI PC viewer is active. This means the document was printed to RVI and is waiting to be uploaded.

6. From One Look, select an index method:
   1. Drag Drop (PC Viewer Indexes)
      Use this option if you indexed the document using the RVI Index Values pop up.
   2. Drag Drop (Indexes Above)
      Use this option if you want to index the document using the One Look browser.

The newly imported will now be available for inquiry.

Copyright 1992, 1999, Real Vision Software, Inc. (RVI), Alexandria, Louisiana. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means without the express written consent of RVI Software, P.O. Box 12958, Alexandria, LA 71315-2958. However, copies of the One Look Manual can be reproduced, in whole or part, for use with the Real Vision Imaging System by Real Vision Software Licensee’s, for use with the imaging system.