8.2. Work

• Plot
• Event
• Operation
• Operator
• Culture
• Machine
• Type of Guide
• Limit Type
• Implement
• Coupling Type
• Implement Sensor
• Implement Distance
• Lateral Displacement
• Overlay
• Distance Antenna – Coupling
• Coupling Distance – Implement Wheel
• Coupling Distance – Bar

*Screen type = Dual List

The Work parameters area is present in the settings menu. In this menu, the system settings are made. IsoView referring to the agricultural machine, the operator, what the crop will be, the various parameters of the operation that will be carried out, among other relevant items of the work.
To access the menu, the user must select the Job item and press the confirm button , as shown in the figure below.

The work settings menu will then be presented, whose items are represented in the following images.

The job settings menu has some peculiarities, listed below..

• If the parameter of Operation is configured as Spraying, the Implement is shown with its value in meters, followed by the value of the Number of Nozzles between parenthesis. If the Operation is different from Spraying, the number of nozzles will not be displayed..

• if the parameter Coupling Type is configured as Fixed Engagement, the Implement Distance is displayed in the menu.

• if the parameter Coupling Type is configured as Drawbar, 3 other parameters are displayed in the menus.
  • Distance Antenna – Coupling
  • Coupling Distance – Implement Wheel
  • Coupling Distance – Bar

Details of each of the job settings menu items are provided in the next topics..