Navegação

5.4. Fixing the Monitor

Well, now we are going to install the Monitor in the operator’s cabin, but before starting, you must take into account some points to define the best installation position:

  1. The installation location must be suitable for fixing the Monitor;
  2. The Monitor must be within reach of the operator when seated in a normal operating position and in his forward field of vision.;
  3. The Monitor cannot block or hinder the driver’s vision while driving the equipment;
  4. The location must allow access to the entrance usb side to insert or remove the Portable Memory (pen drive);
  5. The location must allow easy access to connect and disconnect system cables IsoView.

The monitor mounting kit consists of a double articulated arm and a set of three suction cups, which must be used to adhere to a flat surface, as shown in the figure below..

Item Description
1 Round base support with sphere, for fixing the Monitor.
2 Ball jointed double click arm with pressure adjustment handle.
3 Round base support with sphere, for fixing the Trio of suction cups.

How to use the monitor mounting kit

trio of suckers

Step Action
1 Find a flat and smooth area to attach the set of suction cups, preferably one of the windows in the machine cabin.
2 Clean the area with a cloth dampened with isopropyl alcohol or neutral soap diluted with water..
3 Thoroughly dry the area before attaching the suction cups, ensuring it is free of dust..
4 Place the lock of the three suction cups in the open position “OFF”.
5 Rest the three suction cups on the smooth and flat part of the surface.
6 Press the suction cup assembly against the surface and turn the lock of the three suction cups to the closed “ON” position, to suction and secure the assembly.

double articulated arm

Step Action
1 unscrew the handle until the ends of the arm are able to embrace the two rubber spheres: one on the side of the trio of suction cups and the other on the side of the monitor.
2 Position the monitor in the most comfortable way for its correct visualization, moving the articulated arm.
3 screw the handle until the whole assembly is firm and in the desired position.

Tips