Well, now that we have introduced you to the system IsoView it’s time to start installing the kit on your machinery. To do so, follow the steps recommended in this chapter..
*But if you have questions, feel free to contact our Support and Technical Assistance that we will help you.
! read the Security instructions before performing the installation steps.
!To ensure proper operation of the IsoView, have the installation carried out by a qualified technician.
!If your machine has a safety system with airbags, be careful not to mount the monitor in a position where you could be hit by the triggers, as there is a risk of property damage, serious injury or even death.
! Don’t forget to use personal safety equipment (PPEs) necessary for the service, such as glasses, gloves, shoes, among others, and also isolate the nearby area to avoid accidents with third parties. If in doubt, consult your work safety technician to guide you..
!Make sure the machinery is turned off using the main switch or that you have the ignition key on.
!Signal the area, indicating that there are people working on the machinery to avoid accidents with third parties.
