6.4.4. Information Board

• The Navigation Screen

On the Navigation screen near the footer, there is the Information Board, where it is possible to view several important information during the Navigation operation, without the need to return to the system configuration menus IsoView.

Below we present a Example of Information Board, explaining its content.

Item	Description
	Information Board located near the footer.
	information button which when pressed changes the displayed information page.

When pressing the button the pages of the Information Board change cyclically within a sequence, presenting information collected during Navigation.

Below we present a Example of the sequence of pages in the Information Board, explaining each item that composes it.

Page	Item	Description
	Satellite signal quality, signal correction quality (if any) and system accuracy if enabled.
		icon of Signal Quality of satellites
		Fixes quality icon SBAS
		Fixes quality icon RTK
		Fixes quality icon PPP paid signal
	Differential Age	Time in seconds since the last signal correction message (when configured)
	Distance from Base	antenna distance GPS (GNSS) from the machine to the base RTK (when configured)
	Job operation details.
	Dist. traveled	Distance traveled so far at work
	Total area	Total boundary area
	Applied Area	total applied area
	Remaining Area	Difference between the total boundary area and the total applied area
	Details of work in progress.
	Plot	Field file name used
	Event	Used event file name
	Operation	Operation being applied
	Culture	Configured culture name
	Details of the configuration used.
	Machine	Configured machine name
	Implement	Configured implement width parameter value (for spraying, includes number of nozzles)
	Overlay	Configured override parameter value
	Dist. Implement	Antenna distance parameter value GPS from machine to configured implement
1	Irrigation configuration details (appears only if enabled).
	Maximum Distance	Maximum Distance parameter value, configured in
	Dist. until the alert	Distance from the start of the irrigation application to the alert distance, configured in
	Limit	Distance remaining to reach Maximum Distance (hose length)
	Odometer	Value of distance traveled since pressing the reset odometer button
	Current date/time and working time.
	Operator	Configured operator name
	DD/MM/YYYY – HH:MM	current date and time
	working time	Total work time since the event opened
	Effective Time	Effective time of work, in which there was application
	Details of the tab being used.
	alon	Longitude in degrees from point A of the straight guide line
	A-Lat	Latitude in degrees from point A of the straight guide line
	b-lon	Longitude in degrees from point B of the straight guide line
	B-Lat	Latitude in degrees from point B of the straight guide line
	course	Straight guide heading angle
	A-B distance	Distance between points A and B of the straight guide
	Current coordinate and signal quality.
	lon	Longitude in degrees from current antenna point GPS (GNSS) installed on the machine
	lat	Latitude in degrees from current antenna point GPS (GNSS) installed on the machine
	Altitude	Altitude in meters from current antenna point GPS (GNSS) installed on the machine
	HDOP	System horizontal precision dilution value GNSS at the moment (scattering in the sky of the satellites)
	Sat. visible	number of satellites GPS (GNSS) visible
	Sat. used	number of satellites GPS (GNSS) used in the solution

Note.: ¹ The page is displayed only for the Irrigation operation.