The Section Number of Nozzles setting establishes how the total number of nozzles is distributed among spray sections. Next, the screen for setting the number of nozzles for the example in section 1.
The sum total of the number of nozzles for each individual section cannot exceed the total number of nozzles, so the system IsoView recalculates the nozzle numbers of the sections below the one currently being set, according to the last changed value.
To exemplify, a configuration with a total number of 10 nozzles will be used, and the number of sections equal to 3. When configuring the first section with 4 nozzles, sections 2 and 3 will automatically be filled with 3 nozzles each, dividing the rest of the 6 nozzles equally between them.
In the same example, if the user then tries to configure the second section with 6 nozzles, the system will alert that the number of nozzles is invalid, as there will be no remaining nozzles for the third section.
On the other hand, if the configuration of the second section is performed with 5 nozzles, the third section will automatically assume the value of 1 nozzle, thus completing the total sum of the 10 nozzles of the implement.
