6.4.2.3. Guidelines

• The Navigation Screen

• Map Area

The Guide Lines are the virtual guide lines that represent the path the machine must follow, in order to carry out the agricultural application work in parallel lines..

O IsoView features three Guidance Lines on the Navigation screen:

• Center Line, checked in red, is the target tab and closest to the machine at the moment.
• side lines which are two lines marked in blue represent the Parallel Guides, to the right and left of the target center guide line, which are naturally the next guides to follow after maneuvering at the end of the field.
  

Below is an image illustrating the details of the guidelines in the map area of ​​the Navigation screen.

Item	Description
	Target Guide Line, drawn with a solid red line, which represents the guide closest to the machine.
	Next guideline parallel to right of target guide, drawn as solid blue line.
	Next guideline parallel to left of target guide, drawn as solid blue line.
	Number that identifies parallel guide lines, in relation to the initial guide line created by marking points A-B, or guide zero. Positive numbers represent guidelines to the right of the A -> B direction. Negative numbers represent guidelines to the left of the A -> B direction.
	Graphical representation of the deviation in relation to the target guideline, displayed in the header of the Navigation screen by a distance unit value and the direction < or > in relation to the target guideline.